Gardner Denver HD-2250, Operating And Service Manual

Page: 14 / 47

Page 8
care. Protect them from damage by people,
objects and vehicles. Never lay them in
dirt, mud, ice or other loose material which
could plug the fluid opening or interfere with
their operation. Never use the wand,
nozzle, gun, etc. to pry loose material off
items being cleaned.
Before
starting operation in a cold
environment, check to make sure there is
no ice in the fluid system and repeat this
inspection each time before operation is
restarted.
Before purchasing wands, nozzles, guns,
connections, hoses, etc., manufacturers of
these components should be contacted for
detailed information on the design and
safety
features incorporated in their
products. After careful study of various
manufacturers products, we recommend
that only those wands, nozzles, guns,
connections and hose, etc., be considered
for purchase that you judge to offer the
highest quality of design, construction and
safety, since these components are among
the most critical to the safe operation of
high pressure liquid jetting, blasting and
cleaning equipment.
After you have selected and purchased
these
components, follow the
manufacturer’s instructions completely in
their use.
In summary, high pressure jetting,
blasting and cleaning are inherently
dangerous, as the pressures and flow
rates needed to remove scale, clean, etc.
are sufficient to cause personal injury,
death,
and/or equipment damage
resulting from, but not limited to, any of
the conditions described in the above
Danger Notices.