13-17-621 Page 104
4.7.2.8 Additional Operating Limits
When the
Temperature Inputs
on the
Programmable IO
screen are set to a channel, additional operating
limit tabs will show next to the
Default Limits
on the
Operating Limits
screen. The possible tabs are
Control Panel Temperature, Delivery Temp, Dryer Temp,
and
Enclosure Temp
and they will only show up
when they are addressed to a channel.
Under each of these tabs the user can set
warning
and
fault
limits for each of the additional temperature
sensors on the machine. There are min and max values for each entry as explained previously for the
other settings. An example of the
Enclosure Temperature
tab settings and the other possible tabs are
shown below in Figure 143.
Figure 143: Enclosure Temperature Limits
4.7.3 Control - Default:
The
Control
settings are mainly related to compressor/motor operation. Figure 144 below shows the home
screen for
Control
settings under the advanced settings menu. These are the settings in the
Default
tab.