- 7 -
10
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
X1
5.2 Electrical Installation
5.2.1 General
(see data sheets D 111 + D 117)
The electrical data can be found on the data plate (
N
) or the motor data plate. The motors correspond to DIN / VDE 0530 and
have IP 54 protection and insulation class B or F. The connection diagram can be found in the terminal box on the motor. Check
the electrical data of the motor and the control gear for compatibility with your available supply (voltage, frequency, permissible
current etc.).
Connect the motor to the incoming supply. It is advisable to use thermal overload motor starters to protect the motor and wiring.
All cabling used on starters should be secured with good quality cable clamps.
We recommend that motor starters should be used that are fi tted with a time delayed trip resulting from running beyond the
amperage setting. When the unit is started cold overamperage may occur for a short time.
The electrical installation must only be carried out by a qualifi ed electrician under the observance of EN 60204. The
main switch must be provided by the operator.
5.2.2 Approximate values for setting motor overload protection
The approximate values for setting motor overload protection should be obtained from the motor manufacturer or
motor nameplate.
5.2.3 Electrical connections for the motor and control equipment
All electrical connections for the motor and control equipment are located in the terminal box. Each connection terminal is num-
bered and these correspond as designated for each control item (as shown in the circuit diagram fi g. 10). If any work is carried
out then the re-connection should be in accordance with this numbering system. Problems with function can be prevented and
faults are easier to fi nd.
5.2.4 Terminal Box Connections Closed Circuit Cooling
Fr
esh or Exter
nal Cooling without Fanmotor
➝
without fan motor and
operating thermostat
Suction valve
Bleeding valve
V
alve fl
ushing
unit
V
alve fr
esh oil
V
alve oil mist separator
Reserve
Safety thermostat
Operating thermostat
Level pr
e-separator
Level fl
ushing
liquid
Level cooling water
Level oil mist separator
Level fr
esh oil
Reserve
