![background image](http://html1.mh-extra.com/html/gardner-denver/dhp-series/dhp-series_instruction-manual_3793254021.webp)
21
LT DRYING
RT HOLDING
(Not displayed in FIXED Cycle)
LEFT TOWER DRYING
LT HOLDING
RT DRYING
(Not displayed in FIXED Cycle)
RIGHT TOWER DRYING
LT DRYING
RT DEPRESSURIZE
LT DRYING
RT HEATING
LT DRYING
RT COOLING
LT DRYING
RT REPRESSURIZE
TOWER SWITCHOVER
TOWER SWITCHOVER
LT HEATING
RT DRYING
LT DEPRESSURIZE
RT DRYING
LT REPRESSURIZE
RT DRYING
LT COOLING
RT DRYING
DRYER STATUS SCREENS
Energy Savings
(Not displayed in FIXED Cycle)
ENERGY SAVINGS
XX%
Note:
Energy Savings will appear
after seven days of continuous use.
Service reminder (filters)
HOURS TO SERVICE
FILTERS: XXXX
Service reminder (desiccant)
HOURS TO SERVICE
DESICCANT: XXXX
Service reminder (valves)
HOURS TO SERVICE
VALVES: XXXX
Outlet Dew Point
(Displayed only if JP3 is ON)
DEW POINT
±XX°C ±XXX°F
Dewpoint Demand SetPoint
(Displayed only if JP3 is ON)
DWPT CNTL SETPT
±XX°C ±XXX°F
Left Tower Temperature
LT TEMP
±XX°C ±XXX°F
Right Tower Temperature
RT TEMP
±XX°C ±XXX°F
Heater Temperature
HEATER TEMP
±XX°C ±XXX°F
Energy Mgmt Signal
(Displayed only if JP2 is ON)
ENERGY MGMT SGNL
XX%RH XXX°F XX°C
XX MBAR X.XX PSI
Energy Mgmt Setpoint
(Displayed only if JP2 is ON)
ENERGY MGMT SET
XX MBAR X.XX PSI
(This is the calculated “hold” set-point,
which is based on the sample air tem-
perature.)
DRYER DISPLAY SCREENS