34
light conditions:
up to 800 meters
medium conditions:
up to 350 meters
tough conditions:
up to 60 meters
MAINTENANCE
Before any work on the machine
itself, remove battery from
machine.
Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose
fixings, and worn or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
If the trimmer should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer service agent
BLADE MAINTENANCE
Before any work on the machine
itself, remove battery from
machine.
To remove the worn blade
push in direction of the
arrow until it snaps off the pivot.(Fig.16)
Clean the pivot
of any residual plastic/debris with a
sharp knife.
To refit the new blade
place the eyelet over the pivot
and pull outwards until it snaps into place.
AFTER TRIMMING / STORAGE
After Trimming/Storage
Stop and remove battery from
product. Ensure battery is
removed before storage.
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially
from the ventilation slots .
Turn the machine on its side and clean the cutting
guard
inside. If grass cuttings are compacted,
remove with a wooden or plastic implement.
Battery should be stored between 0 – 45°C;
incorrect storage could result in the battery being
damaged.
Charge the battery 1 hour before storing.
During storage, charge the battery at least once
every three months to protect it from damage.
TECHNICAL DATA
Voltage V
18
No load speed min
-1
8000
Max. cutting circle mm
260
autonomy
+/-30 min
Battery
1.3 Ah Li-Ion
Weight kg
1.9
Charger
Mains voltage V
100-240
Mains frequency Hz
50-60
21Vdc 1500mA
Noise/Vibration Information
Noise emission values measured according to
relevant standard :
Acoustic pressure level LpA
78 dB(A)
K = 3 dB(A)
Acoustic power level LwA
88.3 dB(A)
K = 3.04 dB(A)
Guaranteed sound power
LwA 91 dB(A)
ATTENTION !
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
must be worn.
Weighted root mean square acceleration according
to relevant standard. :
5,8 m/s²
K=2.3 m/s²
Summary of Contents for GCBE18VCR-LI10L
Page 2: ...2 1 3 2 3 16 18 6 7 8 14 10 11 12 4 5 13 9 17 19...
Page 37: ...37...