13
Technical data
Nominal voltage:230V~50Hz
Power consumption
S2 20 min 85 Watt
Idle rotation:
4800 min
-1
Entering angle:
35° to the left and the right
Grinding wheel-dm (interior)
23 mm
Grinding wheels-dm (exterior):
max. 108 mm
Grinding wheel thickness:
3,2 mm
Noise pressure level Lpa:
80 dB (A)
Noise power level Lwa:
93 dB (A)
Housing protection:
II
Weight:
2.15 kg
Read the operating instructions
Look out for rotating blades.
Disconnect plug from the mains before carrying
out maintenance work
Wear ear protection, protective goggles,
dust mask and gloves
Protective class
II
AHS, Uhlandstraße 50, A-4600 Wels
Intended purpose
The chain sharpening device is appropriate to sharpen conventional types of chain saws.
The device is not suited for any other types of use.. It is mainly intended for use in the DIY
sector and not for ongoing commercial use. The importer shall not provide a guarantee
or assume any liability for every form of use extending beyond and the resulting damage
and injuries.
The observation of the operating, servicing and maintenance conditions and the
observation of the safety notes contained in the instructions is necessary to ensure the
device is used as intended.
When using tools some safety precautions must be observed to prevent injuries
and damage. Therefore read through the operating manual/ safety instructions
carefully. Store them in a safe place so that the information is available to you at
all times. If you should hand the appliance on to other persons please hand
these operating instructions/safety instructions out with them. We do not assume
any liability for accident or damage which do not arise due to the failure to
observe these instructions and the safety instructions.
1188986 BDA GB 85 KSG.indd 13
24.09.13 10:44
