AFTER SALES SUPPORT
13
1300 855 831
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
MODEL: HL650o PRODUCT CODE: 63736 04/2019
AUS
Safety regulations
m
WARNING!
The voltage must be the same as the voltage specified on the rating
plate.
Keep these regulations in a safe place!
1. WORK AREA
•
Keep your work area clean and tidy. Disorder and insufficiently illu
-
minated work areas can lead to accidents.
• Do not use this tool in a potentially explosive environment containing
combustible liquids, gases or dust. Electric tools generate sparks,
which can in turn ignite dust or vapors.
• Keep children and other persons away from the electric tool while it
is being used. Allowing yourself to get distracted can cause you to
lose control of the tool.
2. ELECTRICAL SAFETY
Attention!
The following basic safety measures must be observed
when using electric tools for protection against electric shock, and
the risk of injury and fire. Read all these notices before using the
electric tool and keep the safety instructions for later reference.
•
The tools connector plug must be able to fit into the socket outlet.
Do not modify the plug in any way! Do not use adapter plugs in
conjunction with electrically grounded tools. Unmodified plugs and
matching socket outlets reduce the risk of an electric shock.
• Avoid touching grounded surfaces, such as those of pipes/tubes,
heaters, cookers and refrigerators. There is an increased risk of
getting an electric shock if you are electrically grounded.
• Keep the tool away from rain and moisture/wet conditions. Pene-
tration of water into an electric tool increases the risk of an electric
shock.
• Do not use the cable to carry the tool, hang it up or pull the plug out
of the socket. Keep the cable away from sources of heat, oil, sharp
edges and moving tool parts. Damaged or tangled cable increases
the risk of an electric shock.
• If you intend to use an electric tool outdoors, ensure that you only
