AUS
Text
28
AFTER SALES SUPPORT
1300 855 831
MODEL: HL650o PRODUCT CODE: 63736 04/2019
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
XVI. TROUBLESHOOTING
The table below contains a list of fault symptoms and explains what you can do to
remedy the problem if your equipment fails to work properly. If the problem still per-
sists after working through the list, please contact your nearest service workshop.
m
IMPORTANT!
Hint in case of sending the equipment to a service station:
Due to security reasons please see to it that the equipment is sent back free of oil
and petrol!
Problem
Possible Cause
Remedy
Motor stops
starting
Overload protection device
disengaged to protect the log
splitter from being damaged
Contact a qualified Electri
-
cian
Fails to split
logs
a) Log is improperly positioned
b) Size of log exceeds the ca-
pacity of the machine
c) Splitting Wedge cutting
edge is blunt
d) Oil leaks
a) Refer to ”Operation” sec-
tion to perfect log loading
b) Reduce log size before
operating
c) Sharpen cutting edge
d) Locate leak(s) and con-
tact your dealer
Log pusher
moves jerkily,
making unfamil-
iar noise or
vibrating a lot
Lack of hydraulic oil and exces-
sive air in the hydraulic system
Check oil level for possible
refilling
Contact your dealer
Oil leaks
around the
cylinder ram
or from other
points
a) Air sealed in hydraulic sys-
tem while operating
b) Venting Screw is not tight-
ened before moving the log
splitter
c) Oil drain bolt is not tight
d) Hydraulic control valve as-
sembly and/or seal(s) worn
a) Loosen Venting Screw
by some rotations before
operating the log splitter
b) Tighten Venting Screw
up before moving the log
splitter
c) Tighten the oil drain bolt
d) Contact your dealer
AUS
Troubleshooting
