![background image](http://html1.mh-extra.com/html/gardenline/gpcs46z/gpcs46z_user-manual_3538897035.webp)
34
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB
0845 872 2740
019022605
GPCS46Z, 06/14, 52579
STORAGE
Caution: Never put a chainsaw into storage for longer than 30
days without carrying out the following steps.
Storing a chainsaw
Storing a chainsaw for longer than 30 days requires storage
maintenance. Unless the storage instructions are followed, fuel
remaining in the carburetor will evaporate, leaving gum-like
deposits. This could lead to difficult starting and result in costly
repairs.
1. Remove the fuel tank cap slowly to release any pressure in the
tank. Carefully drain the fuel tank.
2. Start the engine and let it run until the unit stops to remove
fuel from carburetor.
3. Allow the engine to cool (approx. 5 minutes).
4. Remove the spark plug.
Note: Store the unit in a dry place and away from possible sources
of ignition such as a furnace, gas hot water heater, gas dryer, etc.
Putting the saw back into operation
1. Remove spark plug.
2. Pull starter rope briskly to clear excess oil from combustion
chamber.
3. Clean the spark plug and check that the electrode gap (approx
0.65mm) is correct.
4. Prepare the unit for operation.
5. Fill the fuel tank with proper fuel/oil mixture. Refer to the
Fuel and Lubrication Section.
Waste disposal
The equipment and its accessories are made of various types of
material, such as metal and plastic. Defective components must be
disposed of as special waste. Ask your dealer or your local council.
Summary of Contents for GPCS46Z
Page 37: ...GPCS46Z 06 2014...