Gardenline GPCS46Z, User Manual

Page: 25 / 37

24
www.coreservice.co.uk AFTER SALES SUPPORT
IRE GB
0845 872 2740
019022605 GPCS46Z, 06/14, 52579
inside the log to be cut. Always finish cutting from the opposite
side of the bending direction to prevent the chain bar from being
trapped in the cut.
A log lying on the ground (FIG 22)
Saw down halfway, then roll the log over and cut from the
opposite side.
A log supported off the ground (FIG 23)
In area A, saw up from the bottom one-third and finish by sawing
down from the top. In area B, saw down from the top one-third
and finish by sawing up from the bottom.
Cutting limb of a fallen tree (FIG 24)
First check to which side the limb is bent. Then make an initial cut
from the bend side and finish by sawing from the opposite side.
WARNING: Be alert to the spring back of a cut limb.
Pruning of a standing tree (FIG 25)
Cut up from the bottom, finish down from the top.
WARNING:
Do not use an unstable foothold or ladder.
Do not overreach.
Do not cut above shoulder height.
Always use both hands to grip the saw.
FIG 22
FIG 23
FIG 24
FIG 25