18
AFTER SALES SUPPORT
1300 922 271
service.australia@
isc-gmbh.info
GLCS 85 E
09/2014
91568
6.3 Set the chain stopper (Fig. 9/10)
•
Fold the chain stopper (1) onto the chain.
•
Pull the chain backwards against the chain stopper
(1) until the latter stops a cutting link (A).
•
Important! You must make sure that the angle of
the stopped cutting link coincides with the grin-
ding angle. If it does not, pull the chain one link
further.
•
Fold the grinding head (4) down until the grinding
wheel (8) is touching the chain link (A) that is to
be ground. (To do so, you can move the chain back
and forth a little using the setting screw of the
chain stopper (3)
6.4 Set the depth limit (Fig. 10)
•
Fold the grinding head (4) down and set the grin-
ding depth using the setting screw (7)
Important!
The grinding depth should be set so
that the full cutting edge of the cutting link is shar-
pened.
9
10
3
A
1
7
6
4
8
GLCS_85_E_AUS_SPK7.indb 18
05.06.14 13:56
