7
AFTER SALES SUPPORT
1300 922 271
service.australia@
isc-gmbh.info
GLCS 85 E
09/2014
91568
18.
Stay alert
Watch what you are doing. Use common sense. Do
not operate tool when you are tired.
19.
Check damaged parts
Before further use of the tool, a guard or other
part that is damaged should be carefully checked
to determine that it will operate properly and per-
form its intended function. Check for alignment of
moving parts, binding of moving parts, breakage
of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that
is damaged should be properly repaired or repla-
ced by an authorised service center unless otherwi-
se indicated elsewhere in this instructions manual.
Have defective switches replaced by an authorised
service center. Do not use tool if switch does not
turn it on and off.
20.
Warning
The use of any other accessory or attachment
other than recommended in this operating instruc-
tion may present a risk of personal injury.
21.
Have your tool repaired by an expert
This electric appliance is in accordance with the re-
levant safety rules repairing of electric appliances
may be carried out only by experts otherwise it
may cause considerable danger for the user.
22.
Connect the dust extraction device
Wherever there are facilities for fitting a dust ext-
raction system, make sure it is connected and used.
GLCS_85_E_AUS_SPK7.indb 7
05.06.14 13:56
