Troubleshooting
Problem
Possible Cause
Solution
Burners will not light using
the ignition system.
Gas cylinder is empty
Replace with full cylinder
Faulty regulator
Have regulator checked or
replace
Obstructions in burner
Clean burner
Obstructions in gas jets or
gas hose
Clean jets and gas hose
Electrode wire loose or
disconnected on electrode or
ignition unit
Reconnect wire
Electrode or wire is damaged Change electrode and wire,
change igniter
Burner will not light using a
match
Gas cylinder is empty
Replace with full cylinder
Faulty regulator
Have regulator checked or
replace
Obstructions in burner
Clean burner
Obstructions in gas jets or
gas hose
Clean jets and gas hose
Low flame or flashback (fire
in burner tube - a hissing or
roaring noise may be heard)
Gas cylinder too small
Use larger cylinder
Obstructions in burner
Clean burner
Obstructions in gas jets or
gas hose
Clean jets and gas hose
Windy conditions
Use barbecue in a more
sheltered position
Gas valve knob difficult
Gas valve jammed
Replace gas valve
Any modifications or repairs to the barbecue must be carried out by a suitable
qualified engineer i.e. Gas Technical Engineer.
Troubleshooting
34
