background image

43

                2 X 20V Li-ion 5-in-1 Cordless Garden Kit

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A  •  10/2020  •  702316

(toll free)

AFTER SALES SUPPORT

(toll free)

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A  •  10/2020  •  702316

Storage and transportation

Storage

1) Remove the battery packs.
1) Clean the product as described previously.
2) Store the product and its accessories in a dry, frost-free, well-ventilated 

place. Protect the product from direct sunlight.
3) Always store the product in a place that is inaccessible to children. The 

ideal storage temperature is between 5 and 20°C.
4) We recommend using the original package for storage or covering the 

product with a proper cloth or enclosure to protect it against dust.

Transportation

1) Switch the product off and remove the battery packs before transporting.
2) Attach transportation guards for cutting means of pole hedge trimmer, 

brush cutter and pole saw.
3) Always carry the product by its handles.
4) Protect the product from any heavy impact or strong vibrations which 

may occur during transportation in vehicles.
5) Secure the product to prevent it from slipping or falling over.

Summary of Contents for CBC36A

























































Reviews: