HTW250/240P
Introduction
AFTER SALES SUPPORT
9
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
At all times pay attention to all safety instructions.
IX. MAINTENANCE, CLEANING AND SERVICING
Before each maintenance and cleaning work
- Stop the engine.
- Wait until the cutting device stops moving.
- Stop the engine and pull off the spark plug connector (with the exception of idle
speed adjustment).
Do not carry out maintenance work close to open flames. Risk of fire.
Maintenance and repair work other than those described in this chapter is only
allowed to be carried out by service staff.
For maintaining and cleaning, removed security devices must unconditionally
be mounted properly and proved again.
Use only original parts. Other parts can result in unexpected damages and injuries.
In order to aviod possible injuries wear gloves.
To guarantee a long and reliable usage of the hedge trimmer carry out the following
maintainance works regularly.
Check the hedge trimmer for obvious defects such as
- loose fastening elements
- worn or damaged components
- deformed, broken or damaged cutting device
- leaks from the fuel tank cap or fuel lines
Check the hedge trimmer after each application for
- wear and tear, in particular sliding play of the cutting device
- correct assembly and faultless covers and protective devices.
Necessary repair or maintainance operations have to be carried out before the
usage of the hedge trimmer.
Adjusting the cutting device (Fig. 3)
Readjust the sliding play if cut material is clamped between the blades or the play
AUS
HTH250/240P
Working instructions/Maintenance, cleaning and servicing
AFTER SALES SUPPORT
23
1300 855 831
MODEL: HTH250/240P PRODUCT CODE: 59823 03/2018
