Layout/Scope of delivery
HTW250/240P
10
AFTER SALES SUPPORT
00800 4003 4003
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
Fuelling the hedge trimmer (Fig. 1)
• Stop the engine and allow it to cool down.
• Wear protective gloves.
• Avoid eye and skin contact.
• Strictly follow the instructions under 'Safe handling with fuels'.
1. Only fuel the hedge trimmer in the open or in sufficiently ventilated rooms.
2. Clean the area around the filler neck. Contamination in the tank may result in
malfunction.
3. Shake the container once more before pouring the fuel mixture into the tank.
4. Carefully open the fuel tank cap (12) to allow possible overpressure to release.
5. Carefully fill the fuel mixture up to the lower edge of the filler neck.
6. Close the fuel tank cap (12). Check that the fuel tank cap (12) is tight.
7. Clean the fuel tank cap (12) and the area around it.
8. Check the tank and the fuel lines for leaks.
9. Operate the fuel pump (11) if required.
10. Before starting the engine move at least three metres away from the fuelling
place.
VII. ATTACHMENT AND OPERATION
You may not start to operate the machine until you have read these operating
instructions, observed all the instructions given and completely and properly
assembled the machine!
- Make sure that the ON/OFF switch (6), the throttle lock-out switch (7) and the
throttle trigger (14) function perfectly. (Fig. 1)
- This hedge trimmer is only allowed to be started after it is completely assembled.
- Support the hedge trimmer when starting and hold it firmly. Make sure that the
cutting device can move freely.
To start the hedge trimmer:
1. Keep a safe distance to flammable materials.
2. Have a safe standing position.
3. Place the hedge trimmer on the ground in front of you, with the cutting device
pointing away from your body.
4. Put your right foot tip in the rear handle.
5. Hold the front handle with your left hand.
AUS
Before starting the equipment/Attachment and operation
HTH250/240P
18
AFTER SALES SUPPORT
1300 855 831
MODEL: HTH250/240P PRODUCT CODE: 59823 03/2018
