![background image](http://html1.mh-extra.com/html/gardenline/94227/94227_user-manual_3536771012.webp)
Assembling the flower steps
12
5. Take the two sets of assembled frames and slot the connection spikes
18
of the hook frame with connection spikes into the connection hinges
19
of
the hook frame with connection hinges (see
Fig. C
).
You may need to push down harder than initially expected.
6. Next, assemble the shelves (see chapter, “Assembling the shelves”).
Assembling the shelves
1. Layout the top shelf
3
and the top shelf ornamental fringe
6
. Align the
screw holes.
2. Loosely fasten the top shelf ornamental fringe to the top shelf with two M6 ×
12 mm screws
12
(see
Fig. D
).
3. Layout the middle shelf
4
and the middle ornamental fringe
7
. Align
the screw holes.
4. Loosely fasten the middle ornamental fringe to the middle shelf with three
M6 × 12 mm screws (see
Fig. E
).
5. Layout the bottom shelf
5
, the stabilising T-bar
11
, and the two bottom
shelf ornamental fringes
8
. Align the screw holes.
6. Loosely fasten the bottom shelf ornamental fringes to the bottom shelf with
four M6 × 12 mm screws.
7. Next loosely fasten the stabilising T-bar to the bottom shelf with two
M6 × 12 mm screws (see
Fig. F
).
8. Check the position of all the ornamental fringes on the shelves. If the
positions are satisfactory, tighten all the M6 × 12 mm screws with either the
open-ended wrench
16
or the ring wrench
17
.
The shelves are now assembled.
9. Next, combine the frames and shelves (see chapter, “Combining the frames
and the shelves”).
Combining the frames and the shelves
1. Make sure the assembled top shelf
3
and top shelf ornamental fringe
6
are upside down.
2. Turn the assembled frames upside down and place the topmost part of the
hook frame with connection spikes
1
and the hook frame with
connection hinges
2
on the assembled top shelf.
Make sure the holes in the hook frames align with the holes on the shelf.
3. Loosely secure the top shelf to the hook frames by manually inserting and
securing M6 × 25 mm screws
13
(see
Fig. G
).
Repeat for the remaining shelves.
4. Carefully turn the loosely assembled flower steps upright. If the positions
are satisfactory, tighten all the screws with either the open-ended
wrench
16
or the ring wrench
17
.