![background image](http://html1.mh-extra.com/html/gardenline/94227/94227_user-manual_3536771011.webp)
Assembling the flower steps
11
Assembling the flower steps
WARNING!
Risk of injury!
Improper handling of the flower steps’ components may result
in personal injury.
− Always wear the appropriate protective equipment during
assembly (e.g., steel-toed gardening boots, gardening or
work gloves, protective eyewear, etc.).
− Keep children and pets away from the work area and
away from the flower steps’ components. The flower steps
contain small parts that may cause a choking hazard.
− Do not let children play with the flower steps’ components.
These components are not toys for children.
− Find a flat, level area near the location where you want to place the flower
steps. Ensure the flower steps’ components are handy.
Before tightening any screw, assemble all the parts first so that
you can adjust their positions as necessary.
Assembling the frames
1. Layout the hook frame with connection spikes
1
, one long L frame
10
and two M6 × 25 mm screw
13
.
2. Loosely secure the long L frame to the hook frame with connection spikes
by manually inserting and securing the M6 × 25 mm screws (see
Fig. B
).
Repeat for the hook frame with connection hinges
2
and the remaining
long L frame.
3. Take one short L frame
9
and match it up to the front of the hook frame
with connection spikes. Make sure the holes in the short L frame face
upwards.
4. Loosely secure the short L frame to the hook frame and long L frame by
manually inserting and securing two M6 × 25 mm screws (see
Fig. B
).
Repeat for the hook frame with connection hinges and the remaining
short L frame.