7. Maintenance
w
e
DANGER! Risk of physical injury!
Cutting injuries can be caused if the hedge trimmer
does switch on unintentionally.
v
Before maintenance, remove the battery
(see 4. Initial Operation) and slide the protective
cover
w
over the cutter blade
e
.
Cleaning the Hedge Trimmer:
w
e
ATTENTION ! Damage to the hedge trimmer!
v
Never clean the hedge trimmer under running water
or with a water jet (in particular a high pressure
water jet).
1. Clean the hedge trimmer with a damp cloth.
2. Clean the airflow slots with a soft brush
(do not use a screwdriver).
3. Clean the blade
e
with a brush, if required, and lubricate with
a low-viscosity oil (e.g. GARDENA Spray Oil
Art. 2366).
Avoid contact of the oil with the plastic parts and wear gloves.
8. Troubleshooting
w
e
DANGER! Risk of physical injury!
Cutting injuries can be caused if the hedge trimmer
does switch on unintentionally.
v
Remove the battery before troubleshooting
(see 4. Initial Operation) and slide the protective
cover
w
over the cutter blade
e
.
Problem
Possible Cause
Remedy
Hedge trimmer does not start
Battery is flat.
v
Charge battery
(see 4. Initial Operation).
Battery not pushed onto the
handle properly.
v
Push battery onto the
handle and make sure that
the locking buttons snaps
in correctly.
Blade soiled (e. g. by resin).
v
Clean blade
(see 7. Maintenance).
Blade blocked.
v
Remove obstacle.
Hedge is not cleanly cut
Blade blunt or damaged.
v
Have blade replaced by
GARDENA-Service.
The Hedge Trimmer can no
longer be switched off
Start button is stuck.
v
Remove battery and loosen
start button.
Hedge Trimmer stops.
Error-LED
ß
W
flashes
Battery overload.
v
Wait for 10 sec.
Press button
ß
B
on the
battery and restart.
20
GB
