b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power source and /
or the battery pack from the power tool before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools.
Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may
affect the power tool’s operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type of battery pack
may create a risk of fire when used with another battery
pack.
b) Use power tools only with specifically designated
battery packs.
Use of any other battery packs may create a risk of injury
and fire.
c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
tally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Pole Pruner – safety instructions:
• Always ensure that body parts are kept clear of the
chain area. Do not remove the cut material or hold
the material that is to be cut when the blades are
turning. Only remove blocked material when the
device is switched off.
One moment of negligence when handling the Pole
Pruner can cause severe injuries.
• Always carry the Pole Pruner at its handle, and only
when the chain is not moving. During transport or
whilst storing the Pole Pruner, the bar cover must be
applied. Proper use of the Pole Pruner reduces the risk
of injuries by the chain.
• Hold the power tool by the insulated handle
surfaces as the chain may come into contact with
hidden power cables.
The contact of the bar with a “live” wire may energize
metal parts of the device and lead to electric shock.
Additional Safety Recommendations
Work area safety
Only use the Pole Pruner as intended.
The operator or user is responsible for accidents or
hazards occurring to other people or their property.
Pay special attention to the hazard for third parties
posed by the increased working radius when the
telescopic tube is extended.
Warning! When wearing hearing protection, and due to
the noise produced by the product, the operator may
not notice persons approaching.
Warning! This machine produces an electromagnetical
field during operation. This field may under some
circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury,
we recommend persons with medical implants to
consult their physician and the medical implant manu-
facturer before operating this machine.
Do not use the product when a thunderstorm is
approaching.
Electrical safety
Only connect charger to the AC voltage specified on the
rating plate.
Under no circumstances should an earth be connected
to any part of the product.
Personal safety
Always wear suitable clothing, gloves, and stout
shoes.
Thoroughly inspect the areas where the Pole Pruner is
to be used and remove all wires, hidden electric cables
and other foreign objects.
All adjustments (tilting the cutting head, adjusting the
length of the telescopic tube) must be made with the
protective cover applied and the Pole Pruner must not
be supported by the blade whilst doing so.
Before using the machine and after any impact, check
for signs of wear or damage. Have repairs carried out as
and when required.
Never attempt to work with an incomplete Pole
Pruner or one that has been subjected to unauthorised
modifications.
Power tool use and care
You should know how to switch off the device in the
event of an emergency.
Never hold the Pole Pruner at the protective cover.
Do not use the Pole Pruner when its safety devices are
damaged.
Do not use a ladder when using the Pole Pruner.
Always use the device when standing on solid ground.
17
GB
