background image

General Power Tool Safety Warnings

 

WARNING ! Read all safety warnings and  

all instructions. 

Failure to follow the warnings and instructions 

may result in electric shock, fire and / orserious injury.
Save all warnings and instructions for future 

 reference. 

The term “power tool” in the warnings refers to your 

mains operated (corded) power tool or battery-operated 

(cordless) power tool.

1) Work area safety
a) Keep work area clean and well lit.  

Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable 

liquids, gases or dust. EPower tools create sparks 

which may ignite the dust or fumes.
c) Keep children and bystanders away while 

 operating a power tool. Distractions can cause you  

to lose control.

2) Electrical safety
a) Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adaptor 

plugs with earthed (grounded) power tools.  

Unmodified plugs and matching outlets will reduce risk 

of electric shock.
b) Avoid body contact with earthed or grounded 

 surfaces, such as pipes, radiators, ranges and 

 refrigerators.  There is an increased risk of electric 

shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet 

 conditions.  Water entering a power tool will increase 

the risk electric shock.
d) Do not abuse the cord. Never use the cord for 

 carrying, pulling or unplugging the power tool.  

Keep cord away from heat, oil, sharp edges or 

moving parts. Damaged or entangled cords increase 

the risk of electric shock.
e) When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.  

Use of a cord suitable for outdoor use reduces the risk 

of electric shock.

f) If operating a power tool in a damp location is una-

voidable, use a residual current device (RCD) protected 

supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety
a) Stay alert, watch what you are doing and use 

common sense when operating a power tool.  

Do not operate power tools if you are tired or ill or if 

you are under the influence of drugs, alcohol or 

medication. A moment of inattention while operating 

power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear 

eye protection. Personal protective equipment can 

be purchased from specialist traders. 

Protective equipment such as dust mask, non-skid 

 safety shoes, hard had, or hearing protection used for 

appropriate conditions will reduce  personal injuries.
c) Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and / or battery pack, picking up or carrying 

the tool. Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 

invites accidents.
d) Remove any adjusting key or wrench before turn ing 

the power tool on. A wrench or a key left attached to a 

rotating part of the power tools may result in personal injury.
e) Do not overreach. In order to prevent overtired-

ness, alternate working positions and ensure suf-

ficient breaks are taken. Keep proper footing and 

 balance at all times. This enables better control of the 

power tool in  unexpected situations.
f) Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves away 

from moving parts. Loose clothes, jewellery or long hair 

can be caught in moving parts.
g) If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used.  

Use of dust collection can reduce dust-related hazards.

4) Power tool use and care
a) Do not force the power tool. Use the correct 

power tool for your application. The correct power 

tool will do the job better and safer at the rate for which 

it was designed.

Explanation of Symbols on your product.

WARNING!
Read the user instructions carefully

to make sure you understand all the

controls and what they do.

Risk of fatal injury due to electric shock! 

Keep at least 10 m away from electricity 

lines.

Always wear protective gloves.

Always wear non-slip safety shoes.

Always wear a hard hat.

Always wear eye and ear protection.

Do not expose to rain.

Do not leave the product outdoors

while it is raining.

Direction of movement of 

the chain.

16

GB

Summary of Contents for TCS Li-18



















Reviews: