Factory Reset:
The smart Sensor will be reset to the factory settings.
(5)
(4)
1. Pull off the lid
(4)
.
2. Push the battery compartment cover
(5)
for a short time.
New connection (if the connection failed).
– or –
Push and hold down the battery compartment cover
(5)
for at least
10 seconds.
LED flashes green.
Cancels the existing connection and allows a new connection to be
established, e. g. different Gateway.
Usages:
To keep the soil moisture level as constant as possible, irrigation should
be carried out with short watering cycles and short watering times. This
especially applies to flower boxes on balconies, which have a watering
time of < 5 minutes.
The spread of moisture in the soil after watering or rainfall is rather slow.
In the worst-case scenario it may happen that irrigation and a rain shower
overlap until the required soil moisture is attained.
14
EN
