Place the sensor:
(8)
(3)
6. Push the sensor into the soil
(8)
up to the lower edge of the horizontal
part of the sensor head (The sensor needs to be pushed into the soil at
least to the min mark).
Here the measuring area
(3)
must be in full contact with the damp soil
on both sides.
7. Press down the soil
(8)
around the measuring area
(3)
lightly.
8. Water the area around the Sensor with approx. 5 litre water.
It may take several hours until the sensor measures the actual soil
moisture.
9. If you place the sensor in the lawn, cut the stripped-off lawn into pieces
and place them around the sensor.
12
EN
