4. If indicator lamp still flashes blue in step 3
above: Put L and GUIDE back in their original
positions. Then switch R and GUIDE. If indicator
lamp now is lit with a solid green light then
disconnect L and connect a new boundary wire to L.
Connect the other end of this new wire at the middle
of the suspected wire section. Follow the same
approach as in 3a) and 3b) above.
5. When the break is found, the damaged section must
be replaced with a new wire. Always use original
couplers.
367 - 003 - 15.12.2017
Probleemoplossing - 51
