Connecting the unit:
WARNING! To avoid damage to the plug, the extension cable must
be inserted into the cable lock.
e
w
e
w
1. First make a loop with the extension cable
w
, thread the loop
into the cable lock
e
and pull the extension cable tight.
2. Connect the unit’s plug to the extension cable.
3. Connect the extension cable to a 230-V mains socket.
Starting the unit:
t
r
To start:
v
Move the ON/OFF switch
r
to the
ON position.
The unit starts.
NOTE: For ErgoJet 3000 (EJ 3000) only: The motor speed can
be increased or decreased by using the variable speed control
t
.
CAUTION: To avoid causing damage to the unit, only use the
variable speed control in blow mode. DO NOT attempt to use the
variable speed control in vacuum mode. Lower speeds during
vacuum use could allow debris to build up, stall the motor and
cause unit failure.
To stop:
v
Move the ON/OFF switch
r
to the
OFF position.
The unit stops.
Working positions:
Blow mode
Use your unit as a blower for sweeping debris or grass clippings
from driveways, sidewalks, patios, etc. Also, for blowing grass
clippings, straw, or leaves into piles, or removing debris from
corners, around joints, or between bricks.
For ErgoJet 3000 (EJ 3000) only:
Use the variable speed control to increase or decrease the motor
speed during blower use.
Direct air flow by directing the blower tube down or to one side.
Always work away from solid objects such as walks, large stones,
vehicles, and fences.
Clean corners by starting in corners and moving outward. This will
help prevent an accumulation of debris which could fly into your
face. Be careful when working near plants. The force of the air
could damage tender plants.
22
GB
