u
z
ö
Working position 1:
For standard trimming.
Working position 2:
1. Press the foot pedal
u
and lower the shaft downwards into the
desired working position.
2. Release the foot pedal
u
and allow the shaft to engage.
CAUTION! Avoid contact between the ground and the trimmer
head in working position 1 + 2.
Working position 3 (only for art. 9825):
The upright must be in the uppermost position in working
position 3.
1. Turn the plant guard
ö
by 90° to its
parking position until it
locks into place.
2. Press the foot pedal
u
and move the upright into the
uppermost position.
3. Press the button
z
and rotate the trimmer head from 0° to 90°
until it engages.
4. With the impeller, move the trimmer along the lawn edge.
CAUTION! The trimmer may only be used provided that the
trimmer head is engaged at an angle of 0° or 90°.
Setting the trimmer to body
height:
o
1
h
t
Setting the shaft length:
v
Loosen the clamping sleeve
t
, extend the handle
1
to the
desired shaft length and re-tighten the threaded collar
t
.
The clamping sleeve
t
must be fastened firmly enough to
prevent the shaft from being moved.
Setting the additional handle:
v
Pull the lock
o
belonging to the additional handle
h
,
set the additional handle
h
to the desired incline and
release the lock
o
.
If the trimmer is correctly set to the body height, the posture
is upright and the trimmer head in
working position 1 is tilted
forwards slightly.
v
Hold the trimmer by the handle
1
and additional handle
h
in
such a manner that the trimmer head is tilted forwards slightly.
Adjusting the plant guard:
ö
ö
Working position
Parking position
v
Turn plant guard
ö
through 90° into the required position
until it locks into place.
17
GB
