ß
B
ß
L1
ß
L2
ß
L3
ß
W
Avoid exhaustive discharge:
If the battery is empty, the full discharge protection automatically
switches off the device to prevent the battery from discharging
fully. To prevent the fully charged battery from self-discharging
via the unplugged charger, it should be disconnected from the
charger after charging. If the battery was stored for more than
1 year, it must be fully recharged.
If the battery was fully discharged, the charging indicator lamp
9
will flash rapidly at the start of charging (twice per second).
If the charging indicator lamp
9
still flashes rapidly after
10 minutes, a fault has occurred (see 8. Troubleshooting).
If the error-LED
ß
W
on the battery flashes, a fault has occurred
(see 8. Troubleshooting). In case of a completely empty battery
it will take approx. 20 minutes until the LEDs on the battery
will indicate charging. But the charging process is indicated by
the flashing LED
9
on the charger.
Battery charging status indicator during operation:
v
Press button
ß
B
on the battery.
66 – 99 % charged L1, L2 and L3 lit.
33 – 65 % charged L1 and L2 lit.
10 – 32 % charged L1 lit.
1 – 9 % charged L1 flashing.
0 % charged No indicator.
5. Operation
DANGER!
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
v
Never bypass the safety devices or switches (e.g. by tying
the safety lock to the handle).
Risk of injury!
v
Remove the battery prior to each adjustment of the
working position, to the shaft length, additional handle
or plant guard!
Setting the working position:
Working position 1:
Standard trimming
Working position 2:
Trimming beneath
obstacles
Working position 3:
Vertical trimming
of overhanging lawn
edges
16
GB
