5. Operation
Connecting extension cable:
0
A
7
1
2
1. Push connector of extension cable
0
on to the plug
7
.
2. Draw a loop of the extension cable
0
through the cable strain
relief device
A
1
and suspend in position
2
.
This prevents inadvertent disconnection of the plug and socket
connection.
3. Insert extension cable
0
into a mains socket.
Starting Electric
Lawn Rake:
Danger of injury if the Electric Lawn Rake does not switch
off auto matically!
v
Do not remove or bridge safety devices fitted to the
Electric Lawn Rake (e.g. by tying the starting lever to
the upper handle)!
3
B
C
DANGER! The Electric Lawn Rake does not stop
immediately after the motor has been switched off:
v
Never lift, tip or carry the Electric Lawn Rake with
the motor running!
v
Never start on solid ground (e.g. asphalt).
v
Always maintain the safety distance between the
aerator cylinder and the user as defined by the
guide handle.
1. Place Electric Lawn Rake on flat grass surface.
2. Keep safety interlock
B
pressed down and pull starting lever
C
on the upper handle
3
. The Electric Lawn Rake starts.
3. Release safety interlock
B
.
When in operation, the extension cable
0
must always be
guided in the direction you are working and to the side of the
area to be worked on.
Always work away from the connection cable.
Blockage Protection: If the aerator cylinder is blocked, e.g. by
a foreign body, immediately release the starting lever. If the
blockage lasts longer than 10 seconds and the starting lever has
not been released, blockage protection is activated. In this case
immediately release the starting lever. The Lawn Rake can be
switched on again after cooling down for approx. 1 minute.
6. Maintenance
DANGER! The aerator cylinder can cause injuries!
v
Prior to maintenance, unplug from the mains and
wait until the Electric Lawn Rake drum has stopped.
v
Wear working gloves for performing maintenance.
16
GB
