8. When the pump has drawn in the water, turn the rotary switch
to
RUN
.
9. Close shut-off devices in the delivery pipeline again.
The pump switches off automatically when the maximum
pressure is reached. Normal mode (standby) has been reached
( ).
Change display information:
RESET key:
Reset quantity delivered display
:
If the
RESET
key is pressed whilst
is operating (quantity
conveyed in m
3
since last reset) only the
display is reset to
0
.
This permits the quantity delivered to be measured at any desired
time interval.
➔
Hold
RESET
key down for 2 seconds.
Restart after a fault:
If a fault has occurred, the pump can be switched on again
prematurely by pressing the
RESET
key.
➔
Press
RESET
key.
The frost symbol goes out after the
RESET
key is pressed.
19
GB
Normal mode
(standby)
In operation:
Throughput display in
l/h
(in 100 l/h increments)
In operation:
Pressure display
in bar.
(in 0,2 bar increments)
Normal mode
(display for 3 seconds)
Normal mode
(display for 3 seconds)
Press
shift key
.
Press
shift key
.
Press
shift key
.
Press
shift key
.
Press shift key to return to throughput display, pressure display or standby.
and automatically return to throughput display or standby after one minute..
Standby:
Pump has reached
max. pressure.
Quantity delivered in
m
3
since first start-up
(display for 3 seconds)
Quantity delivered in
m
3
since last reset.
(display for 3 seconds)
In some circumstances
ERROR 06
may appear. This does not
impair the further operation of the pump.
www.devicemanuals.eu
