15
GB
Assembling the handle :
3. Assembly
1. Insert lower part of bottom upright
1
into upright holders
2
up to stop and
secure with the screws
3
.
2. Push connector
4
from underneath
into upper part of bottom upright
1
.
3. Insert threaded rod
6
from left through
lower parts of central upright
5
,
upper part of bottom upright
1
and
connector
4
right up to the stop.
4. Slide threaded bearing
8
into
clamping lever
7
.
5. Screw clamping lever
7
onto
threaded rod
6
approx. 4 turns.
6. Move clamping lever
7
onto
connector
4
and check whether
clamping lever
7
locks.
7. If clamping lever
7
does not yet
lock, screw another turn onto
threaded rod
6
. Repeat procedure
until clamping lever
7
locks on
connector
4
.
8. Push the screws
9
through the
upper handle
0
and the middle
handle sections
5
and secure with
the 2 wing nuts
A
.
The safety lock
B
of the handles
0
must be
on the right in the direction of travel.
9. Fix the motor cable
C
to the handle with the two cable
clips
D
.
4. Function
To produce a well-maintained lawn we recommend cutting the
lawn once a week if possible. The lawn becomes thicker if cut
frequently.
Relatively long cut grass (
>
1 cm) must be removed so that the
lawn does not become yellow and matted.
After relatively long intervals between mowing
(holiday lawn)
, up
to max. 12 cm, first of all cut in one direction with the cutting height
as high as possible, then cut in the crosswise direction at the
cutting height required.
Storage :
The cylinder lawnmower and the Accu must not
be stored at more than 45 °C or when exposed
to direct sunlight.
Ideally, the Accu should be stored below
25 °C.
Mowing correctly :
7
8
7
9
4
5
B
0
6
C
D
9
D
1
A
6
7
7
4
1 2
3
