12
ASSEMBLY INSTRUCTIONS
11
10
11. Attach strap inside of cylinder assembly (H)
to secure cylinder. Then, close door on
cylinder assembly (H) to complete
installation.
10. Connect the preassembled regulator
assembly from burner assembly (C) to a
20-lb. LP-gas cylinder (sold separately).
Line up threads on cylinder fitting with those
on regulator and rotate clockwise until tight.
HAND TIGHTEN ONLY. DO NOT USE ANY HAND
TOOLS TO MAKE THIS CONNECTION. Be
careful not to cross threads when screwing
in fitting.
To disconnect the LP-gas cylinder, first
make sure the cylinder valve is in the "OFF"
position. Then, turn the knob on the
regulator assembly counterclockwise until it
is loose.
Warning
Before connecting, be sure there is no
debris caught in the head of the LP-gas
cylinder regulator valve or in the head of the
burner and burner ports.
E
