The Garden Lights Switch is a smart switch intended for use in combination with the Garden Lights
12-Volt outdoor Lighting system. To control the Switch, a suited tablet or smartphone is required with
the (free) Garden Lights app installed. For more information about using and downloading the app,
go to www.garden-lights.com/smart.
Specifications Switch
Product
Garden Lights Switch
Article number
6269011
Usage (max.)
1W
Maximum capacity (max.)
150W
Dimensions (H x L x W)
240 x 74 x 38 mm
Protection class
IP44
Ambient temperatures
-20°C to 50°C
Cable length
5cm
CONTENT OF THE PACKAGING
[Figure A]
1. Switch 2. Antenna 3. Ground spike 4. Wall mounting bracket 5. Screws 6. Plugs
Verify whether all parts are included in the packaging. For questions about parts, service or
complaints, you can always contact us. [email protected]
USE
Please follow these guidelines when installing the Switch
[Figure B]
1. The Plus Switch must be connected to a permanently powered 12-volt Garden Lights system.
Check whether the green indicator light on the Plus Switch is permanently lit.
Attenion: For correct functioning of the Switch, your transformer must be powered on permanently.
[Figure C]
2. Only the lights you connect to the output of the Switch can be turned on/off by the Switch. Any other
lamps in the system will be permanently turned on.
[Figure D]
3. The Switch cannot be used in line with the Garden Lights Motion Sensor (art.no. 6156011) or the
Garden Lights Timer+Sensor (art.no. 6009011) or Garden Lights Receiver (art.no. 6148011 and
6149011). If you want to combine these accessories in one system, you have to connect each
accessory separately with the main cable.
EN
E
F
GL Manual SWITCH 2020.indd 7
GL Manual SWITCH 2020.indd 7
17-02-20 10:54
17-02-20 10:54
