Oven model
PICCOLO
BRAVO
DELIZIOSO
SUPERIORE
Dimensions HxWxL
550 x 600 x 640 mm 640 x 600 x 640 mm 540 x 720 x 780 mm 650 x 720 x 780 mm
Electric power
2,6 kW
3,4 kW
4,2 kW
6,9 kW
Power source
230 V ~
50/60 Hz
230 V ~
50/60 Hz
380 V ~
50/60 Hz
380 V ~
50/60 Hz
Type of electric cables
H05RN-F
3x1,5 mm
2
H05RN-F
3x1,5 mm
2
H05RN-F
3x1,5 mm
2
H05RN-F
3x1,5 mm
2
Weight
29 kg
46 kg
61 kg
71 kg
Number of trays
3
4
3
4
Number of fans
1
1
1
2
Positioning
On counter-top
or on rack
On counter-top
or on rack
On counter-top
or on rack
On counter-top
or on rack
Water intake
3/4”
3/4”
3/4”
3/4”
Water pressure
200÷300 kPa
(2÷3 bar)
200÷300 kPa
(2÷3 bar)
200÷300 kPa
(2÷3 bar)
200÷300 kPa
(2÷3 bar)
Water hardness
7-11 °F
7-11 °F
7-11 °F
7-11 °F
Insulation class
I
I
I
I
IP degree of
protection
IPX1
IPX1
IPX1
IPX1
Control panel
Electromechanical
Digital
Electromechanical
Digital
Electromechanical
Digital
Electromechanical
Digital
You are advised to check whether the supply corresponds to
the specifications of the order. You are advised not to trail or
tilt the oven for any reason.
The oven must be lifted perpendicularly to the floor, moved
horizontally, placed perpendicularly to the floor.
1.5 - Compliance with the standards and directives
• The ovens comply with the safety provisions and requirements indi-
cated in the following European Directives and their associated spe-
cific norms:
- European Machinery Directive
2006/42/EC
as amended
- European Low Voltage Directive
2006/95/EC
as amended (standard
EN 60335-1
and
EN 60335-2
)
- Electromagnetic Compatibility Directive
2004/108/EC
as amended
(standard
EN 50165
,
EN 55014
,
EN 50366
,
EN 61000-4
)
Following the conformity with the above-mentioned standards, the
producer declares that his products comply with the European legisla-
tion in force and therefore are provided with the appropriate
mar-
king that allows their sale in the European states.
Furthermore the noise emission of the functional components does
not exceed
70 dB
(
A
).
1 - INTRODUCTION
6
1.3 Technical characteristics
1.4 - Handling, transportation and unloading
The packaging of the oven is produced by the company in compliance
with the stipulated agreements or, however, depending on the Country
of destination or the transportation means used.
After the installation, the packaging may be used again or disposed of
in accordance with the regulations in force in the Country of the buyer.
The ovens must be transported in their packaging close to the installa-
tion place.
For all the lifting and handling operations of the oven or of its autono-
mously transported components, please refer to specialized personnel.
The material that is shipped is accurate-
ly controlled before being delivered to
the shipping agent. Upon reception of
the oven, make sure that it hasn’t been
damaged during transport or that the
packaging has not been tampered with
and there has been no consequent re-
moval of components from the inside.
In case of detection of damages or mis-
sing parts inform the carrier and the
producer immediately producing pho-
tographic documentation.
Fig.1
EN
