background image

1 - INTRODUCTION   

4  

We thank you for the trust you granted us when you purchased our 

product and advise you to carefully read this guide before using the 

ovens.

This document contains all the information you need for the correct 

use and maintenance of the oven.

The purpose of this guide is to allow the user, most of all the direct 

user, to take all the measures and prepare all the equipment and the 

necessary materials for a safe and long-lasting use of the oven.

This guide must be consigned to the person in charge of its use who 

shall keep it in a suitable place, in order to make it available for consul-

tation and for the ordinary maintenance of the oven. In case the oven 

is resold, the guide must be consigned together with it.

This guide is also intended to be used by the technician when per-

forming commissioning and extraordinary maintenance operations.

The  intended  use  and  available  configurations  of  the  machines  are 

the only ones approved by the producer; do not attempt to use the 

machines in a way which would not comply with the indications sup-

plied by the producer.

The  intended  use  indicated  is  only  valid  for  machines  having  full 

structural, mechanical and system efficiency.

The producer refuses to accept any liability deriving from improper 

use  or  use  by  untrained  personnel,  from ‘do-it-yourself’  changes  or 

repairs performed by unauthorized personnel and from use of non-

original spare parts or non-specific for the oven model. 

1.1 Reference guide 

Also please pay attention to the text in 

bold

, with LARGER or under-

lined fonts, because they refer to particularly important information 

or operations.

The guide must be kept until the final disposal of the machine in an 

adequate place, making sure it is always available for consultation in 

its best conservation state. In case of loss or deterioration, the substi-

tute document will have to be requested directly to the producer or 

the reseller.

1.2 General remarks 

• Carefully read the instructions contained in this guide in order to get 

to know the things to watch out for when performing: 

- the installation of the oven;

- its maintenance;

- its best use.

• These machines will have to be exclusively destined to the use for 

which they have been expressly designed and that is for cooking or 

heating food; any other use is to be considered improper and there-

fore dangerous.

• The oven is intended for professional use and must be used by qua-

lified personnel. 

• Before exiting the premises of the producer, these machines were 

tested and calibrated by expert specialized personnel in order to gua-

rantee the best operation results. 

EN

Summary of Contents for G STARTER PICCOLO





























Reviews: