4 - DIGITAL OVEN PROGRAMMING
22
4.4 Automatic preheating
The automatic pre-heating is activated only when one of the stored
programs is started. It consists in heating the oven to a temperature
30 °C more than the temperature set in the program step. This fun-
ction is used to compensate the heat loss caused by the opening of
the oven door when food is introduced.
When a program is started using the START/STOP key, the oven starts
heating the cooking chamber and PRE appears on the CHAMBER/
PROGRAMS display. When the set temperature is reached the oven
emits an acoustic signal. Then the door must be opened (the acoustic
signal is interrupted), food is put inside the oven and the door is clo-
sed. The previously selected program starts automatically.
Or if you only want to stop the acoustic signal without opening the
door you must keep pressing the START/STOP key.
4.4.1 Disabling the automatic preheating
With the oven ON, the following procedure must be executed in order
to deactivate the AUTOMATIC PRE-HEATING function:
- Press simultaneously P4 and P5 for four seconds. Press the P4 or P5
key until the time/humidity display indicates PRERISCALDO (PRE-HE-
ATING). Then press P6 (steam) to confirm.
The ON setting appears on display 1 (temperature). Select OFF or ON
using the increase and decrease keys. Press START/STOP key to con-
firm.
Press the P1 ON/OFF key to exit the submenu.
4.5 Other functions
4.5.1 Opening and closing the oven door
When the door is opened a switch is activated putting the oven ‘in pau-
se’, DOOR icon green-lit.
The countdown of time is blocked, humidification is interrupted, the
fans are blocked and the heating is turned off.
When the door is closed (DOOR icon red lit) the cooking cycle starts
again from where it was interrupted.
4.5.2 Inversion of reverse fans
The fans slow down in order to allow the inversion of their rotation di-
rection.
THE CYCLE TIMES ARE: 24 seconds OFF, 96 seconds ON right rotation, 24
seconds OFF, 96 seconds ON left rotation, 24 seconds OFF and the cycle
is repeated to infinity…
In this phase humidification is interrupted.
EN
