Garbin 101GE VAP, Operating Instructions Manual

Page: 45 / 138

ELECTRIC VENTILATED OVENS
GB
41
pict. 15
3.2.1c - MODELS
25GE VAP / 45GE VAP / 46PE VAP / 61GE VAP / 64PE VAP / 101GE VAP / 104PEVAP
TEMPERATURE BUTTON
Can be set from 0
°
C to 270
°
C
Default value for temperature: 100
°
C
During a cooking cycle, it is possible to vary the data set by
pressing the temperature button again. At this point, the display
flashes and data entry is repeated.
COOKING TIME
Can be set from 0.00 to 9.59
default value: 000
Holding down the button activates the pre-heating function,
described below.
Use the + and - buttons to select the cooking time in hours and
minutes.
Decreasing the time below 000 enters infinite cooking mode
and the display reads
INF. In this phase, the oven works for
an infinite time.
Conversely, increasing from the infinite cooking mode goes back
to the minimum time.
To return to the cooking time function, set the time display back
to 000.
PRE-HEATING
Holding down the time button activates the pre-heating function.
Pre-heating is activated when in manual mode or during the
creation/modification of the first phase of a program, instead of
the time, the display shows the message “
PRE ”.
Starting cooking by pressing the START button, the oven starts
to operate and, once it reaches the set temperature, the oven
sounds until the door is opened.
When the door is closed again, if a program was in place, the
next phase of the program is automatically started. If, on the
other hand, the oven was in manual mode, the data is cleared
and the user has to enter the data again.
Pressing the time button again returns to the display to 000,
pre-heating is disabled.