BG9008W User Manual
Page 82 of 133
Figure 3-131
Call Routing List
On click
Add
button to load following page.
Figure 3-132
Parameters of Call Route
The following items are displayed on this screen:
►
Phone Prefix
：
A call to the destination number which starts with this prefix will be routed with the
corresponding call route table.
►
Total Length
: The length of destination number, 0 means indefinite length. A call route item is
uniquely identified by the prefix and total length field. Two call route items with
same prefix but different “total length” is allowable. This parameter is also used
to indicate whether the number is received completely.
►
Route Permission
: The call permission of subscriber should be no less than the permission of call
route item.
In order to configure trunk info, choose the menu
Voice Service
→
Call Routing
→
Details,
on click
add
button to load the following page. Each call route item supports up to 4 ways connecting to the
Central Office.
Figure 3-133
Trunk info of Call Route
►
Trunk Type
：
There are 3 trunk types supported, static IP trunk, register IP trunk and
FXO (analog trunk).
►
Trunk Group Number
: The trunk resource can be grouped.
►
Caller Group Number
:
Caller Group Number
indicates which caller number to be sent when call out
through the specified trunk.
►
Prefix Mode
: The parameter specifies what the transformation performed on a called number
before it gets routed over a trunk. There are four transformations that can be
selected:
Unmodify
,
Remove
,
Add
,
Modify
.
3.7.5 Auto
Attendant
Auto attendant service allows callers to be automatically transferred to an extension without the
intervention of an operator, and also allows a caller to reach a live operator by dialing a number, usually
"0". Auto attendant will have a greeting message that is played to callers, this message can be
configured. Different message to play in different time period is available. The auto attendant supports
