Gaoke BG9008W, User Manual

Page: 52 / 153

BG9008W User Manual
Page 41 of 133
Intranet Web Access:
►
Allow Access: If enabled, allow access to the device from the Intranet via telnet.
►
IP Limit: If enabled, allow only specific IP range to access the device from the Intranet via
telnet
►
IP Range: If IP Limit enabled, specifies the IPv4 address range that only allow access to the
device from the Intranet via telnet.
►
IPv6 Range: If IP Limit enabled, specifies the IPv6 address range that only allow access to the
device from the Intranet via telnet.
3.4.4.4.3 SSH
Choose the menu Data Service → Firewall Config → Netword Access-Ctrl → SSH to load the following
page.
Figure 3-55 Configure SSH Access-Ctrl
The following items are displayed on this screen:
►
Port: Port when using SSH tools access device.
Internet Web Access:
►
Allow Access: If enabled, allow access to the device from the Internet via SSH.
►
IP Limit: If enabled, allow only specific IP range to access the device from the Internet via
SSH
►
IP Range: If IP Limit enabled, specifies the IPv4 address range that only allow access to the
device from the Internet via SSH.
►
IPv6 Range: If IP Limit enabled, specifies the IPv6 address range that only allow access to the
device from the Internet via SSH.
Intranet Web Access:
►
Allow Access: If enabled, allow access to the device from the Intranet via SSH.
►
IP Limit: If enabled, allow only specific IP range to access the device from the Intranet via
SSH
►
IP Range: If IP Limit enabled, specifies the IPv4 address range that only allow access to the
device from the Intranet via SSH.
►
IPv6 Range: If IP Limit enabled, specifies the IPv6 address range that only allow access to the