BG9008W User Manual
Page 90 of 133
3.7.11 FXO/FXS Management
3.7.11.1 FXS
Parameters
Choose the menu
Voice Service
→
FXO/FXS Management
→
FXS Parameters
to load the following
page.
Figure 3-153
FXS Parameters
The following items are displayed on this screen:
►
Min Flash Detect Time:
The minimum time to detect the flash.
►
Max Flash Detect Time:
The maximum time to detect the flash.
►
Flash Key Enable:
Whether to enable digit detect after flash.
►
Three Party Call:
If the digit specified is detected after flash, enter the conference mode.
►
Reject Key:
If the digit specified is detected after flash, reject the call on hold.
►
Switch Call Key:
If the digit specified is detected after flash, hold the active call or recover
the call on hold.
►
Keep the hold call when onhook:
If selected, when hanging up in this context, the telephone rings
to notify the user there is still a call on hold.
►
(#)Quick Dial Key:
Whether to send telephone number immediately after receiving the # key.
►
Asterisk Func Key:
Whether to use the ‘*’ key as flash key.
►
Tap Report:
Whether to report an event to server when flash detected.
►
Escape Seq:
Whether to use an escape characters when sending special DTMF.
►
CID Enable:
Whether to enable caller id globally.
►
Callee Inverse Polarity:
Whether to activate the Polarity Reversal for FXS callee.
►
Caller Inverse Polarity:
Whether to activate the Polarity Reversal for FXS caller.
3.7.11.2 DSP
Parameters
Choose the menu
Voice Service
→
FXO/FXS Management
→
DSP Parameters
to load the following
page.
