Gaoke BG9008W User Manual Download Page 153

Page: 153 / 153

BG9008W User Manual

Page 142 of 133

Figure 5-19

Configure DATA Interface Parameter

The following items are displayed on this screen:

►

Enable:

Enable this WAN interface (DATA can’t be disabled).

►

Type:

Select PPPoE if your ISP provides xDSL Virtual Dial-up connection.

►

VLAN Enable:

Optional. Enable VLAN to configure VLAN ID and VLAN Priority Level.

►

VLAN ID:

Optional. VLAN ID of this WAN interface.

►

Priority Level:

Optional. VLAN Priority Level of this WAN interface.

►

Primary DNS:

Enter the IP address of your ISP’s Primary DNS (Domain Name Server)

manually. If you are not clear, please consult your ISP. It’s not allowed to
access the Internet via domain name if the Primary DNS field is blank.

►

Secondary DNS:

Optional. If a Secondary DNS Server address is available, enter it.

►

Username:

Enter the Account Name provided by your ISP. If you are not clear, please

consult your ISP.

►

Password:

Enter the Password provided by your ISP.

►

Service Name /AC Name:

Optional. The service name and AC (Access Concentrator) name, which

should not be configured unless you are sure it is necessary for your ISP. In
most cases, leaving these fields blank will work.

►

LCP Interval:

PPPoE will send an LCP echo-request frame to the peer every

LCP interval

seconds.

►

LCP Max Fails:

PPPoE will presume the peer to be dead if

LCP Max Fails

LCP echo-requests

are send without receiving a valid LCP echo-reply.
Input “2” to configure VOICE parameter as below:

Summary of Contents for BG9008W


























































































































































Search results

Summary of Contents for BG9008W

Reviews:

Related manuals for BG9008W

Brands by name

Popular brands

Gaoke BG9008W, User Manual

Search results

Summary of Contents for BG9008W

Reviews:

Related manuals for BG9008W

Brands by name

Popular brands