57
PTZ setup
PTZ setup
2. Click on the button to select “use” PTZ.
3. If you choose “use”, the
“Setting”
button will be activated.
4. Click on the
“Setting”
button. The display will appear as follows. .
1. Select the camera number for which you wish to set up PTZ control.
The DVR system can connect with any PTZ, speed dome or Rx receiver and control the devices
remotely via our software. To use this function, connect the device to the RS485 port on the DVR
and set up the address and settings of the remote device.
Summary of Contents for ZR-DHC1630NP
Page 1: ...GMS MANUAL...
Page 96: ......
