01A.01
7
4. INSTALLATION
Caution
!
To prevent products from damaging, place the camera on stable and non-
vibrating surfaces If the stability is in doubt, consult with safety personnel for
reinforcements, and then proceed with the installation.
1)
Place the installation template
(paper) that is included in the package
on the desired installation surface.
2)
Drill three holes in correct positions
based on the template paper, and
insert anchor blocks into the holes.
3)
Place the camera body and match
three alignment holes with three
anchor blocks. Fasten the camera with
screws.
4) Connect all the required cables to
the camera.
5)
Adjust the lens position. Detailed
information can be found in
4.2. Setting
the Lens Position
.
6)
Place the dome cover on the main
body of the camera. Dome cover has
three alignment holes that match
camera body’s alignment holes.
7)
Once properly placed, insert
alignment screws into the three holes
of the body and fasten them up.
ZN-DN312XE-M Installation Guide
