01A.01
6
3. PART NAMES
①
Fan
The fan and heater (underneath the black panel) are equipped dehumidify and extract heat
from internal parts.
②
Reset button
The reset button can be used for restarting the device or resetting back to Factory Default.
Refer to
6.3. Reset
and
6.4. Factory Default
for more details. Reset button is located under PCB.
③
Visual standard output configuration switch
The first switch (SW1) sets the visual standard output fsystem. Pressing this button converts
the video output standard to NTSC, PAL, or Off.
④
Video output, audio and IO terminal connector
A 9-pin terminal block is included in the device package. Connect this terminal block into this
connector for cable connection of video output, audio input/output, and digital input/output.
Refer to
5.1. Connector
for more details.
⑤
LAN connector
This is a RJ45 LAN connector for 10/100 Base-T Ethernet.
⑥
Micro SD card slot
It is a memory card slot for external storage.
⑦
Power Adaptor Connector (DC 12V)
The camera requires a DC 12V 1A power adapter.
* Models herein and their appearance are subject to
change without any prior notice.
ZN-DN312XE-M Installation Guide
