EG-4
PARTS DESCRIPTION
Removing and attaching the cover
Dome cover
To remove : Pull the cover away.
To attach : Insert the cover and push it gently until you hear a click.
Body cover
To remove : Insert a fl at-bladed screwdriver into the groove between
the camera body and the body cover, then twist the
screwdriver.
To attach : Align the corrugations on the camera body and body
cover, then push until you hear a click.
Accessories
Exterior
Lens
M4 x 20 2 pcs.
Self-tapping screws
(page EG-7)
I/O cables
LAN cable connector
LAN connection
confi rmation LED
I/O cable connector
Slot for a microSD card
Positioning of the lens body angle/focus lever varies
depending on the lens. The levers are marked with
the following guides. Please refer to these marks for
operation when using the product.
Body cover
Inner cover
Surface mount cover
Dome cover
Service monitor cable
Adapter ring
Power input terminal
Service monitor mode
selection button (Green)
Initialize button (White)
Video output connector
for service monitor
Camera body interior
Camera body
Power cable (plug)
Rotary ring
LAN cable (jack)
Power cable (jack)
9
N
:
Focus
adjustment
lever
W
T : View angle adjustment lever
(US)ZN-D9024NTSC.indd 4
(US)ZN-D9024NTSC.indd 4
2009/02/27 17:15:00
2009/02/27 17:15:00
Summary of Contents for zn-d9024nha
Page 1: ......
