Ganz ZC-PT series Installation Manual Download Page 63

Page: 63 / 76

Installation Guide

Standard/Mini Pendent Mount with the cable(s) coming out of the Pendent
Mount’s outlet.

NOTE:

Please block the cable entry hole with the supplied sponge to

avoid insects entering the Pendent Mount. See the illustrations in section

4.4.1 Compact Pendent Mount > Step 4

Attach the Waterproof Rubber to the Standard/Mini Pendent Mount.

Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount

Kit to the Standard/Mini Pendent Mount with the supplied screws and washers.
Then adjust the Waterproof Rubber to the joint.

Connect the cable(s) to the PTZ Camera.

Join the PTZ Camera to the Outdoor Mount Kit with the supplied M5 screw and

washers.

Pole Box Mounting: Pole Thin/Wide Box +

Standard/Mini Pendent Mount + Outdoor

Mount Kit

Summary of Contents for ZC-PT series













































































Search results

Summary of Contents for ZC-PT series

Reviews:

Related manuals for ZC-PT series

Brands by name

Popular brands

Ganz ZC-PT series, Installation Manual

Search results

Summary of Contents for ZC-PT series

Reviews:

Related manuals for ZC-PT series

Brands by name

Popular brands