Installation Guide
60
4.6.2
Pole Thin/Wide Box Mounting (ZCA-PTB/PWB)
Indoor PTZ Camera:
Items Needed
•
PTZ Camera
•
Data Cable (supplied)
•
Standard/Mini Pendent Mount and equipped items (optional accessory)
•
Pole Thin/Wide Box Mounting (optional accessory)
•
Indoor Mount Kit (optional accessory)
•
Waterproof Rubber (Indoor Mount Kit’s accessory)
•
Stainless Steel Straps for fixing the Pole Thin/Wide Box Mounting (optional
accessory)
Tools Needed
•
Stainless Strap Cutter
•
Tool for screwing
Follow the steps below to mount the PTZ Camera with the Pole Thin/Wide Box and
Standard/Mini Pendent Mount.
1)
Fasten the Pole Thin/Wide Box on a pole with equipped stainless straps.
2)
Run the cable(s) through the hole on the Pole Thin/Wide Box Mounting with the
Data Cable’s 22-pin cable coming out.
3)
Fasten the Standard/Mini Pendent Mount onto the Pole Thin/Wide Box Mounting
with the supplied screws and washers. Then thread the cable(s) through the
Standard/Mini Pendent Mount with the cable(s) coming out of the Pendent
Mount’s outlet.
NOTE:
Please block the cable entry hole with the supplied sponge to
avoid insects entering the Pendent Mount. See the illustrations in section
4.4.1 Compact Pendent Mount > Step 4
.
4)
Attach the Waterproof Rubber to the Standard/Mini Pendent Mount.
5)
Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to
the Standard/Mini Pendent Mount with the supplied screws and washers. Then
adjust the Waterproof Rubber to the joint.
6)
Connect the cable(s) to the PTZ Camera.
7)
Join the PTZ Camera to the Indoor Mount Kit with the supplied screw and
washers.
Summary of Contents for ZC-PT series
Page 1: ......
Page 76: ...Installation Guide 75 ...
