Ganz ZC-L1210NHA, Instruction Manual

Page: 3 / 32

EG-3
This symbol indicates that there is a possibility of injury or damage to equipment.
(1) Use only 24V AC power supply marked class 2 or +12V DC regulated power supply marked class 2.
(2) To prevent fire or electrical shock, UL listed class 2 wiring should be used for the 12V DC or 24V AC input terminal.
(3) Be sure to connect each lead to the appropriate terminal. Wrong connection may cause malfunction and /or dam-
age to the video camera.
(4) Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear irre-
spective of whether the camera is operating or not. This can damage the CCD (Charge Coupled Device).
(5) Do not place the camera in the following locations.
①
Locations subjected to extremely high or low temperatures.
(Operating temperature range: -10
°
C to +50
°
C {14
°
F to 122
°
F})
(Storage temperature range: -20
°
C to +60
°
C {-4
°
F to 140
°
F})
②
Locations subjected to high level of humidity and dust.
(Operating humidity range: max 85% {No condensation})
(Storage humidity range: max 95% {No condensation})
③
Locations where there are large amounts of water vapor and steam.
(6) Ensure the location selected is sufficiently strong enough to support the weight of the camera and is free from vi-
bration.
(7) When this camera is installed near equipment that emits a strong electromagnetic field, some irregularity such as
noise on the monitor screen may happen.
(8) Be sure to use screws suitable for the type of material to which the camera is being mounted.
(9) Do not allow the camera to be subjected to strong impacts or shocks. The camera could be damaged by improper
handling or storage.
(10) Never attempt to disassemble or modify the camera.
(11) If an abnormality should occur, immediately turn off the power and consult your dealer.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, in-
cluding interference that may cause undesired operation.