(10/2000)
26
Programming
ALARM SET UP menu
This menu allows you to carry out various
adjustments to alarm-activated recording
parameters, as described below.
ALARM SET UP
REC MODE 3H
DURATION AUTO
BUZZER ON
ALARM READY ON
ALARM RECALL
(UP)(DOWN)(ENTER) (MENU)
REC MODE
You must select a specific tape running time for
alarm-activated recording. No recording can take
place if this option is set to OFF.
Possible settings:
OFF
No recording in the event of an alarm
3H
3 hours
12H
12 hours
24H
24 hours
DURATION
This feature allows you to select the duration of the
alarm-activated recording.
Possible settings:
30 SEC
30 seconds
1 MIN
1 minute
3 MIN
3 minutes
5 MIN
5 minutes
10 MIN
10 minutes
T.END
until tape runs out
AUTO
for entire duration of alarm signal
BUZZER
You can choose whether you wish to activate or
disable the VCR audible alarm signal. If this feature
is enabled, the built-in speaker will emit a sound for
the entire duration of the alarm signal.
Possible settings:
OFF
Alarm tone disabled
ON
Alarm tone enabled
ALARM READY
You can also select the operating circumstances in
which the video recorder should react to the external
alarm signal.
Possible settings:
OFF
The VCR only reacts if a recording operation has
already started, or if the timer-activated function is
enabled.
ON
The VCR starts recording as soon as it receives any
external alarm signal, even if it is in standby mode.
Ensure that the unit is properly connected to the
mains power supply.
ALARM RECALL
This feature allows you to display a list of the last 16
alarm incidents, with the data shown in
chronological order. Once there are more than 16
incidents, the oldest item is automatically deleted
(see page 16).
POWER FAIL RECALL menu
You can display a list of the last eight power cuts,
with the data shown in chronological order. Once
there are more than 8 incidents, the oldest item is
automatically deleted (see page 17).
Summary of Contents for CTR-024N-2
Page 32: ......