e.bloxx D1-1, D1-4
ABOUT THIS MANUAL
7
HB_EBLOXX-D1_E_V18.doc
Gantner Instruments Test & Measurement GmbH
1.
ABOUT THIS MANUAL
This manual describes the installation and setup of the e.bloxx D1-1 and D1-4 modules. Those modules only differ in
their amount of digital inputs and outputs. So in this manual the e.bloxx D1-1 is described and shown in the pictures and
at every point where there are differences between the e.bloxx D1-1 and the e.bloxx D1-4 there will be a special note.
The following information can be found in this manual:
- Description of the e.bloxx system with detailed information on the hardware and module features.
- Installation description of the modules and how they are connected to the power supply and bus lines.
- Description of the different types of measurement.
- A short introduction on how the e.bloxx modules are configured with the CONFIGURATION SOFTWARE ICP 100.
This software has an integrated help including a detailed description of the configuration process.
- Possible errors and its solutions.
- Technical specifications of the modules.