e.bloxx D1-1, D1-4
MEASUREMENTS
29
HB_EBLOXX-D1_E_V18.doc
Gantner Instruments Test & Measurement GmbH
4.11. Digital Status Output - Process-Controlled
Picture
4.15 – Digital Output as Process-Controlled Output
Picture
4.16 - Signal Diagram of Process-Controlled Digital Output
With the process-controlled output of status information the
e.bloxx D1
monitors measured values, resp. sensor
variables as to constraints (threshold values). The digital output is set if one or several threshold conditions are fulfilled.
The user can freely define the constraints. The user can also preset the logical signal level (see also the
Configuration
Software ICP 100
).
The distribution voltage can amount from 10 up to 30 VDC. It has to be supplied externally or picked up by the power
supply of the sensor module.
The status of the digital output can be scanned as 1/0 information via bus.
4.12. Digital Status Output - Pulse-Width Modulated Signal Output (PWM)
Picture
4.17 – Digital Pulse-Width Modulated Signal Output